Related: Grizzly Couloir Rogers Pass: 3-Day Couloir Marathon

Report from December 9, 2019

My 5AM alarm clock was buzzing in my ears. What a brutal wake-up! After five consecutive days of storm skiing, I needed my sleep. I shoved a hearty breakfast down my throat and grabbed my backpack, packed the previous night.

Joj, Simon and I drove up to Rogers Pass, located in Glacier National Park, BC. I call this place the mini-Alps, for its saw-toothed ridges, steep chutes, and narrow valleys. The frigid sunrise was shining on Mt Tupper, adjacent to the Camels. Fun fact: the December sun shines at an angle of 5.54 degrees, which makes it perfect for ski photography.

After checking our avalanche transceivers, we zig-zagged through the old-growth trees of the Connaught Valley. The first step of our mission was to gain Balu Pass, roughly 4.5km up the drainage to an elevation of 2076m. The climb up to the pass was very gradual but we had to keep our wits about. The Connaught Valley is classified as “complex” terrain for its slopes are lined with several large avalanche paths. We had to keep a watchful eye on the aspects above us, especially when crossing avalanche fans, typically covered with brutal alders.

We took a short break at the top of Balu Pass. I casually snapped a few headshots of the boys and snacked on my delicious homemade granola bars. Within minutes, we were back in action, ready to complete the second step of our journey, crossing the vast expanse below the foot of Ursus Major Mountain.

We examined the avalanche danger in the Cougar Valley, the adjacent drainage which led us to spot a potential overhead slide hazard from the SW aspect of 8812 Peak to our right. The solution was quite simple. We crossed the large open snow plains by sticking to the top of the lateral moraines. Not only was it safer, but the snowpack was much thinner which made trail-breaking effortless.

An hour of trailblazing later, we stumbled across a striated rock face, reminiscent of the Canadian Rockies, with Christmas Couloir tucked at its foot. The feature was dwarfed by Ursus Major Mountain. We scrutinized the face for hidden dangers and plotted a course to gain the ridge. Here’s our thinking.

Booting up the center of Christmas Couloir is pure madness in Rogers Pass conditions. Our deep snowpack would make it extremely strenuous and please don’t get me started on the lengthy exposure to avalanches and rockfall from the towering headwall. We identified two options with the following hazards:

Such a dilemma makes avalanche terrain management so interesting. There isn’t always an easy answer but experience in the mountains will help. Either way, we leaned towards the first option if and only if we could set an uptrack on the steep slope. Before touring up the suspect face, we dug a snow profile in a spot where conditions were similar to the couloir’s and performed a shovel compression test. Our results confirmed our observations: the snowpack seemed stable enough.

In this particular section, we put some distance between us to minimize our exposure from the hazards overhead. I took the lead up the rocky face and set an uber-steep uptrack to reduce our time spent in this dangerous area. I was feeling the snow with my uphill pole every few steps, looking for a hidden windslab. I spotted a suspect rocky outcrop. The slope’s angle was by far the limit to which one can set a track on skins. After multiple awkward kick-turns, I crossed the crux, stopped on a safe spot and radioed in my safety. Joj climbed the crux with ease. As for Simon, he bolted up the track.

Once we were clear of the sketchy slope, we heard a large “whumpf“, the loudest we’ve ever heard, followed by the soft sound of an avalanche racing down the slope. Hairline cracks started shooting out of the snow below my skis reaching as far as Joj, 100m to my left. The lower section of the face was completely wiped out. Now, the upper section on which we stood was about to go for a ride as well, dragging us off the cliffs below. Simon had inadvertently triggered a stiff wind slab from a few meters away at the exact location I suspected earlier. Fortunately, no one was caught in its wake, probably due to our precautionary spacing.

Our plan to ski Christmas Couloir was thrown out the window. This wasn’t our first rodeo with avalanches although I bet Simon’s heartrate spiked for a moment. We backtracked to a relatively safe spot with a feather-light foot and quickly made our way down the slide’s bed which we identified as a solar crust dated back to Nov 23. The rest of the descent was great! Stunning views, deep powder, champagne snow.

After our amazing run, we couldn’t stop there. We headed down Cougar Brook without hesitation, jumping over stumps and alders. At treeline, the snow quality got even better. The additional shelter from the trees meant the coverage was consistently knee-deep.

After all this fun, we had to pay the price. We climbed back over Balu Pass for our final descent all the way to the car. By then, the fatigue had definitely settled in. We chose a mellow line down the Connaught Drainage. Sometimes, it’s great to ski carelessly and simply enjoy the fantastic views of Rogers Pass. We got back to the car within 45 minutes of leaving the pass. After our thorough avalanche debrief, we all agreed that it might have been safer to simply boot up Christmas Couloir, Rogers Pass will always surprise us!

Update: I successfully skied the Christmas couloir of rogers pass on my second attempt a week later with Jayden and Jack. This time, we climbed option #2 which ended up being a whole lot safer than my initial uptrack. Experience trumps all!

Route Info

8-9 h	1600 m	16.5 km	1330-2550 m

The post Christmas Couloir Rogers Pass: Near-Death Avalanche appeared first on The Uptrack.

Ski Touring Terminology

Ski touring, alpine touring, backcountry skiing, ski-mountaineering… to some, those are synonymous with the sport of climbing mountains on lightweight skis and ripping down at Mach 3. Ski touring is the sport, the overarching term that encompasses the discipline. Backcountry skiing and alpine touring refer to the locale in which the sport is practiced. The former evokes a remote area, while the latter, the alpine elevation on a mountain scale.

Related: Backcountry Skiing & Splitboarding Etiquette: The Do’s And Don’ts

There’s a thing called sidecountry touring, otherwise known as slackcountry. It refers to the practice of gaining most of the elevation through a mechanized lift system and then touring outside of the resort’s boundary. Some consider it lazy. I think it’s very convenient. Sidecountry touring is a great alternative when your weekend warrior friends guilt-trip you into showing them what ski touring is all about. Meanwhile, you’re on your tenth ski day in a row, you can barely climb up your bunk bed (shared with your 8 roommates), and your quads feel like bags of sand. First world problems, right?

As soon as you travel over glaciated terrain or introduce rappels or a scrambling section, you are practicing ski-mountaineering. Most of my trip reports, such as the one covering the Sapphire Col Traverse or the Jupiter Traverse (a Rogers Pass classic), are within the realm of the discipline. While most mountain folks think of ski-mountaineers as lycra-sporting masochists, the discipline delivers the perfect blend of fitness, exploration, and adrenaline. Plus, what’s not cool about walking back to town with a questionably thin rope coiled around your chest and a harness full of weathered gear?

Certifications and Courses

Ski touring takes you through mountainous terrain. It’s after years of experience that you’ll realize your playground is literally out to get you. You name it: avalanches, rockfalls, crevasses, storms, whiteouts, cliffs… and that’s only the start of a long Christmas list. Practical courses are essential in equipping yourself with the knowledge required to identify and avoid hazards, thereby preventing injuries or, worse, death.

Avalanche Skills Training

Before heading out, I heavily recommend completing an Avalanche Skills Training (AST Level 1), which teaches you the basics of avalanche terrain management. Avalanche professionals show you how to travel through avalanche-prone terrain, understand the snow mechanisms at play, and identify the hazards hidden under the surface.

Related: The Early Season Snowpack: How It Affects Your Winter

If you want to delve deeper into snow science, you can read through the book Staying Alive in Avalanche Terrain.

First Aid Training

When events take a turn for the worse, you’ll need the tools to patch up your ski buddy… or yourself. First aid training teaches you how to treat life-threatening injuries and illnesses as well as perform CPR (Cardio-Pulmonary Resuscitation). It also equips you with a foolproof system for identifying injuries or illnesses at play. Backcountry-specific courses like the NUEC (Non-Urban Emergency Care). Another option is the Wilderness First Aid certification, which teaches practical interventions with resources found in the wild or in your backpack. For instance, you’d learn how to make a stretcher from twigs and bits of old rope. What’s the difference between the courses? NUEC discusses human anatomy and physiology, granting you a deeper understanding of the mechanisms contributing to the injury or illness.

Crevasse Rescue Course

As you get more caught up in ski touring, you will inevitably come across glaciers. Those huge icy expanses formed eons ago present their own set of problems, mainly:

• Crevasse
• Moat (bergschrund)
• Serac
• Whiteout

Crevasses are gaps in the glacier’s surface, ranging from superficial cracks to deep voids. For instance, the Vallee Blanche, a collection of large glaciers in Chamonix, France, has thousands of crevasses, some more than 300m deep. Year-round, they are hidden beneath the snow, waiting for a climber or skier to unknowingly step right into their gaping maw. In summer, you can spot them from a distance as they open up. In winter, however, the additional snow exacerbates the danger. Don’t underestimate them! I’ve had a few near-death experiences by skiing over thinly covered crevasses and heard horrifying stories of mountaineers simply vanishing.

That’s where a glacier travel and crevasse rescue course becomes essential. If you or your buddies ever fall into a crevasse, you’ll have the means to organize and execute a rope rescue. You will also learn how to rope up for glacier travel. I always recommend an awesome book, Mountaineering: Freedom of the Hills. It’s the definitive mountain bible. While it has a much greater scope, the glacier travel section is of particular interest.

Ski-Mountaineering Course

Let’s face it, extreme sports enthusiasts (like me) have a slight propensity for danger. People around you will inevitably worry when you go for what you misleadingly call a “casual” stroll in the alpine. To appease your significant other, I recommend taking a ski-mountaineering course where you will learn how to navigate glaciers and rappel into a gnarly line. Doesn’t it sound fun?

Related: Planning A Spring Ski Tour: Optimize Your Peak Pursuit

Ski Touring Equipment

Ski touring takes you through notoriously unforgiving terrain where you will rely on your gear. I’ve elaborated below on a list of essentials to get you started on your quest to shred the gnar. Check out gear posts to get a deeper look into the specifics of ski touring gear.

Related: Spring Ski Touring Gear: The Essential Goes A Long Way

Here’s a quick side note on gear design. There’s a difficult problem that makes gear manufacturers scratch their heads. Consumers expect their gear to be extra light, especially those who weigh their gear down to the milligram. On top of being a featherweight, they also expect it to be rock-solid and usable. I’m amazed at how well the industry has solved the dilemma by using innovative designs and researching new ways to blend conventional materials with cutting-edge composites (look at the Salomon Shift MNC-13 bindings).

Avalanche Rescue Tools

Transceiver, shovel, probe. Not a beacon. Canadians don’t use the word “beacon”. The grammar police (me) will correct you. Those three words are drilled into my brain. I often see skiers and riders duck the boundary rope into uncontrolled backcountry terrain without the avalanche gear. Don’t do it. People often ask me if they can forgo buying the probe, for instance. The answer: absolutely not! The avalanche transceiver, shovel, and probe are part of an established system used to extricate victims from avalanche debris, a technique taught in the AST-1 course. Simply put, do not head out ski touring or splitboarding without the key avalanche equipment.

For a closer look: How To Choose An Avalanche Transceiver / Beacon

Boots, Bindings and Skis

Boots, bindings, and skis. Three items that form your shred setup. Let’s think about it for a second. Close your eyes and imagine yourself skiing down a powdery slope. The cold champagne powder blows across your face while you’re cutting two meandering lines like two highlighters across a blank page. Now, focus on your legs, specifically the mechanical forces coursing through your body. As you relieve pressure to transition into the next turn, those forces are transferred from your thighs through your boots, bindings, and skis in that order. All three must work in tandem to provide the best experience.

Ski Touring Boots

I always start a discussion about skis by asking if the boots are sorted out. A good pair of ski boots can make or break a ski touring mission. I completed the Wapta Traverse through the Canadian Rockies in winter 2020 – details in The Wapta Traverse: A Jaw-Dropping 6-Day Ski Tour and then the 6-day Bostock-Revelstoke Traverse in 2021. It was a stunning, but painful adventure with 5 consecutive days of red blisters. It definitely changed my outlook on boots. Before diving deep into the technicalities, remember this critical piece of advice: find a ski boot that fits your foot.

For a closer look: How To Choose Ski Touring Boots: Fit & Features

Ski touring boots are a compromise between uphill and downhill performance. Add durability to the mix and you’ve got an interesting dilemma. Most boot manufacturers stock a range of models available from featherweight boots for ski-mountaineering pros focusing on the climb to freeride skiers prioritizing the descent. There are, however, a few specific features that are common to all models:

1. A selective walk mode which decouples the upper cuff movement from the lower shell.
2. An increased articulation of the upper cuff and lower shell allows for a comfortable gait.
3. A grooved rubber sole (Vibram) to ease climbing over rocks when gaining ridges and peaks, for instance.
4. Toe and heel pin inserts, anchored in the plastic sole and compatible with pin and hybrid bindings (discussed here).

Here are a few examples to clarify my point. On one end of the spectrum, models like the Dynafit TLT Speedfit PRO replace plastic components with composite parts to reduce weight, a design change that comes at the cost of poor downhill performance. If you plan on completing long, multi-day traverses with some mellow skiing in between, a model along those lines is a great option. On the other end, models like the Lange XT Free 130 provide excellent downhill performance but are heavier on the uphill. If you want one boot to shred the resort and occasionally duck the orange rope into the sidecountry, this boot would be perfect.

I lie in the middle, whereas I want a jack-of-all-trades, master-of-none boot. After a few tours, I am now convinced the Atomic Hawx Ultra XTD 130 provides exactly that at a fraction of the weight compared to boots within the same market segment. I’ll provide an update on durability as the season goes on.

Ski Touring Bindings

I nerd out on intricate nuts-and-bolts systems. It’s no surprise that bindings are precisely my jam. I could go on about binding design for days, but I won’t… for your sake. Here’s the summary. You’ve got four common alternatives, including the SHIFT bindings, a proven, ground-breaking option (which will probably become the reference design in the coming years).

For a closer look: How To Choose Ski Touring Bindings: Clip-In & Ski

Again, ask yourself the following: What do I plan on accomplishing with my new setup? For multi-day traverses or long daytrips, pin bindings are king. For hard-charging, adrenaline-fueled daredevils, frame bindings are bomber. For people searching for one binding to do everything, the hybrid or SHIFT bindings will do just the trick. In reality, I’ve got a dedicated resort, sidecountry, and backcountry setup. Unless you’ve got stacks of cash, it takes years to purchase.

Touring Skis

Here’s the short version that the salesperson doesn’t mention. As you now know, gear manufacturers are tasked with balancing weight, durability, and usability. In the ski world, we call the latter “performance”. Naturally, unless you enjoy needlessly torturing yourself, you would want your skis as light as possible. I prefer to avoid lugging a 10lb setup up 2000 vertical meters. However, featherweight skis equate to rattly noodles that will guarantee a swift death on sketchy slopes. While ski designers are continuously minimizing weight and maintaining top performance, sacrifices must be made. I climb mountains to ski big mountain lines. I need a ski that can keep up with my aggressive style. I’m happy to sacrifice some weight for better performance. It’s a balancing act.

For a closer look: How To Choose Touring Skis: Shred On

In a perfect world, you would demo every ski before narrowing it down to one model (or several if you’re a gear hoarder). Truth be told, it’s hard to compare demos since they’re usually skied on different conditions. If you don’t have this option, I recommend reading reviews on reputable websites once you’ve acquired an understanding of terms like flex pattern, waist width, etc.

Climbing Skins For Ski Touring

Now, it’s time to take a good look at climbing skins. Skins are fundamentally strips of prickly fibres that provide traction on the way up like grooves under a cross-country ski. They also provide some glide on the way down. The top of the skins (the side facing your skis) is coated with a glue formulated to adhere to ski bases without leaving residues. The glue is designed to perform adequately over a wide temperature range, from arctic winter to spring skiing days.

For a closer look: How To Choose Climbing Skins For Ski Touring: Stick & Glide

How wide should you buy your skins? They generally come in 10cm increments. I recommend buying skins as wide as the widest point along your ski (usually located at the shovels or tails). Then, trim the extra material according to the manufacturer’s instructions. G3, a popular ski touring gear manufacturer based in Vancouver, Canada, published a great tutorial on YouTube.

As for the plush material, you’ve got two options: mohair or nylon. Each material has its pros and cons summarized in the table below. Most climbing skins are now offered with a mix of nylon and mohair to offer better performance in varied terrain.

Knowing where you plan on ski touring will help you select the right skin. On one hand, 100% nylon skins would be better suited for difficult terrain, forcing you to set an uber-steep uptrack. On the other hand, 100% mohair skins are a godsend during multi-day tours where the terrain is on the flatter end. Nowadays, you can buy skins with a nylon/mohair mix. I found skins consisting of 30% nylon and 60% mohair to be the perfect sweet spot for most days. When I find myself losing traction often, I’m most likely carving too steep of an uptrack anyway. I end up choosing another route up the mountain.

Ski Touring Poles

Ski poles are essential for the descent (obviously), but also critical on the ascent. There are hundreds of models out there that offer different constructions, weights, baskets, and grip shapes. I prefer the length-adjustable ones as I can use the same pair for a variety of sports. I can also collapse them down to nothing and strap them to the outside of my pack when booting up a couloir, for instance. Models with multiple collapsible sections are awesome but prone to breaking. Most importantly, inspect their locking mechanisms. After seeing far too many of them loosen just to have the poles retract unexpectedly, I trust the flicklock system from Black Diamond. It’s a simple design that can be operated while wearing thick gloves. It also doesn’t freeze on you.

A word on pole length. While holding the pole as if you were skiing, the angle between your arm and forearm should be at about 90 degrees. Add 5-10 cm to account for the additional height provided by ski boots and bindings. I prefer slightly shorter poles to avoid having them drag through deep powder.

Ski Touring Layers

Layers are key. Period. Ski touring is hard work, and you will get warm unless you’re facing a Siberian breeze. You want to avoid sweating as much as possible since it saps your heat. You will be cold and miserable the moment you stop exercising. That’s where the “onion peel” system comes in. It consists of several layers that can be shed as you warm up. If you’re a little chilly, you’re doing it right. You’ll find more details on layering in What To Pack For A Ski Tour: A Comprehensive Guide (Layers).

Ski Touring Backpack

A good ski touring backpack is your best friend. It carries everything, ranging from food and water to your avalanche essentials. Invest in a high-quality backpack. It will last for years and will make your life easier in the backcountry. I’ve specified a list of features to look for in a dedicated ski touring backpack:

1. A separate pocket for avalanche essentials
2. An assortment of exterior straps for carrying skis and poles
3. A hip belt to comfortably haul heavier loads
4. A quick-access hip belt pocket for storing your sunscreen
5. Cinch straps to secure the items on your back
6. Large zippers and buckles, which facilitate handling with gloves
7. Ice tool loop
8. A net for strapping your helmet on the ascent
9. A zippered back panel for access

For day trips with no glacier travel or scrambling, I found the optimal size was around 30-35L. When ski-mountaineering, I aim for a slightly larger 40-45L pack to store the glacier rope, crampons, harness, and carabiners. The latter doubles as my overnight pack when staying in huts.

Ski Touring Gear Checklist

You’ll find below some of the common gear I pack on all my ski touring trips. This is by no means an exhaustive list. More can be brought up the slopes.

Related: What To Pack For A Ski Tour: A Comprehensive Guide

Backcountry Skiing Resources

There’s a plethora of resources about weather and avalanche conditions, as well as the rules governing protected areas. I use those almost daily for my guiding work and my days in the backcountry. You’ll find below a more detailed explanation of some of those resources.

For a closer look: Planning a Ski Tour At Rogers Pass: The Online Tools

Weather Forecast

If there’s one thing that’s uncertain in the backcountry, it’s the weather. Several options are available in this day and age. The first that comes to mind is SpotWx, a spot weather forecasting tool that provides detailed meteorological data on an hourly basis, free of charge. However, the website is not for the faint of heart. It requires a basic understanding of meteorology and some half-decent graph-reading skills. Give it a try and don’t despair! I’ll soon publish an in-depth guide on how to interpret the data. Consider donating if you use the website as often as I do.

Alternatively, Snow-Forecast is a less detailed but user-friendly snow forecasting tool. It grants a rough idea of precipitation, temperature, freezing levels, and wind speed/direction, perfect when you’re short on time. The radar plot is another nifty feature that provides insight into how the weather changes over time in your area of interest. There’s nothing better than noticing a snowstorm creeping towards your home resort.

Avalanche Canada, in partnership with Environment Canada, offers the Mountain Weather Forecast, specific to Western Canada. It’s a gift from the snow gods. Professional forecasters summarize their findings in a detailed report spanning a full week, animated radar maps included.

Avalanche Forecast

I watch in awe while avalanches race down the mountainside, ripping trees and splitting rocks along the way. While stunning to watch from afar, they are the real killer. Unfortunately, avalanche forecasting is an inexact science that takes years to master. That’s where your daily bulletin comes into play. Avalanche professionals head out into the backcountry and gather snowpack data from sample snow pits. Forecasters then extrapolate the likelihood of an avalanche triggering based on snowpack observations, snowpit test results, and historical weather data. An AST-1 course will teach the basics of reading an avalanche bulletin.

Avalanche Canada releases the bulletin for Western Canada. As for the Western United States, avalanche.org takes care of that.

Park Information

Since some ski tours take place in National Parks, it’s worth mentioning that their website is a great source for guidelines. My local area, Glacier National Park of Canada, otherwise known as Rogers Pass, is subject to avalanche control daily during the height of winter. Parks Canada prohibits access to large swathes of land if they plan on shelling nearby slopes. The system in place is called the Winter Permit System. All must follow.

Related: Ski Touring In Rogers Pass, BC: All You Need To Know

The post How To Get Into Ski Touring (Backcountry Skiing) appeared first on The Uptrack.